To measure your surfboard,

Your board has three measurements: (L)length, (W) Width, and (T) thickness.

• Length: Nose to tail (e.g. 6’0”).
• Width: The widest point of the board (e.g. 21”).
• Thickness: The depth of the board (usually a fraction, like 3 4/6”).
  
  These measurements are normally found on the underside your surfboard and may look like the picture below.
  
  
  

When choosing a cover, the length is the easy part — we cut and sew any length you need. The real thing to consider is how your board actually fits inside the bag. That means looking not just at the width, but also the thickness of your surfboard. Different boards carry their volume in different ways, so two boards with the same width can still fit very differently.

Taking both width and thickness into account ensures your Boardsox cover fits like a glove.

Surfboards are not flat - yet our bags are. So you need to take into account the thickness of your surfboard.

This is not hard! There are 3 ways you can work this out.

Option 1
1. Send us a message ( using chat function) or e-mail support@boardsox.com.au with your surfboards
L x W x T - as can be seen on the above image example.

Option 2
2. Input your surfboards' measurements into our Chat GPT ( Sarah built this) just follow the steps, and it will literally spit out the right size bag for you.

Option3.

Get a tape measure and place one end on the middle of the left rail and then over to the middle of the right rail. This will take into account the volume and will = the width taking into account the volume so it fits our bags.

Then = match your measurement with the size charts below.

FOR OUR CANVAS COVERS.

👉 A shortboard needs to have the final equation equal to less than 22inches wide ( any bigger it won't fit)

👉 A funboard needs to have the final equation equal to or less than 24 inches wide ( and bigger than that, it won't fit)

👉 A Longboard needs to have the final equation equal to or less than 25 inches wide ( any bigger it won't fit)

If this is all too hard - Just use the chat function, send us your surfboards' measurements, and we can make sure it fits to your order ( who wants to order the wrong size, hey!)

To measure your surfboard,

Your board has three measurements: (L)length, (W) Width, and (T) thickness.

• Length: Nose to tail (e.g. 6’0”).
• Width: The widest point of the board (e.g. 21”).
• Thickness: The depth of the board (usually a fraction, like 3 4/6”).
  
  These measurements are normally found on the underside your surfboard and may look like the picture below.
  
  
  

When choosing a cover, the length is the easy part — we cut and sew any length you need. The real thing to consider is how your board actually fits inside the bag. That means looking not just at the width, but also the thickness of your surfboard. Different boards carry their volume in different ways, so two boards with the same width can still fit very differently.

Taking both width and thickness into account ensures your Boardsox cover fits like a glove.

Surfboards are not flat - yet our canvas bags are. So you need to take into account the thickness of your surfboard.

There are 2 ways you can make sure you choose the right style and size for your surfboard.

Option 1

Use our Boardsox Calculator

Input your surfboards' measurements into our Chat GPT ( Sarah built this) just follow the steps, and it will literally spit out the right size and style bag for you.

Option2.

Grap a tape measure

Place one end on the middle of the left rail and then over to the middle of the right rail. This will take into account the thickness of your surfboard.

Then = match your measurement with the size charts below. Making sure the width is less than the size chart specifications below

BOARDSOX CANVAS COVERS.

👉 A shortboard needs to have the final equation equal to less than 22 inches wide/ 53cm (any bigger it won't fit)

👉 A funboard needs to have the final equation equal to or less than 24 inches wide/ 58cm ( and bigger than that, it won't fit)

👉 A Longboard needs to have the final equation equal to or less than 25 inches/ 63cm wide ( any bigger it won't fit)